VEXpro VersaHubs provide frustration-free torque transfer between wheels, gears, sprockets, and shafts.Got a 1/2" Hex that you need to put a plate sprocket on? No problem. Need to mount a...
VersaHex Adapters allows you to change any 1/2" Hex Bore product to either a 3/8" hex, 1/4" square or 6mm D Shaft bore. This means that you can run a GT2...
Bearings constrain relative motion and reduce friction between moving parts.WestCoast Products offers all the bearings most commonly used by FIRST ® teams, and also replacement bearings for all the "odd sized" bearings used...
Bushings are lightweight, low-friction components that take the place of ball bearings in low-load, low speed scenarios. While they’re probably not suitable for flywheels, intake rollers, and drivetrains, we believe...
These specialty bearings slide axially along a round shaft or tube’s length in order to achieve simple linear motion. Use a set of linear bearings to replace complex radial bearing...
VEXpro offers several different lightweight shaft stock options made from both 6061 aluminum (for tube axles) and 7075 T6 Aluminum (for high-strength hex shafts handling torsional loads). These shaft lengths...
Our aluminum spacers are offered in a wide variety of lengths in order to speed up your spacer-making process, or even remove the manufacturing step altogether! Each spacer is made...
Standoffs are like spacers, but the internal hole is threaded in order for a machine screw to thread into them for a strong and tight fit. Aluminum standoffs can be...
